WEKO3
アイテム
チタンと歯科用貴金属合金のレーザー溶接に関する研究
https://mdu.repo.nii.ac.jp/records/586
https://mdu.repo.nii.ac.jp/records/5863a50e4a1-5a73-49d8-a3a6-1ff4aa4b685f
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
matsumoto_shigaku_29-02-04.pdf (3.3 MB)
|
|
| Item type | Journal Article(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2012-05-24 | |||||||
| タイトル | ||||||||
| タイトル | チタンと歯科用貴金属合金のレーザー溶接に関する研究 | |||||||
| 言語 | ||||||||
| 言語 | jpn | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | レーザー溶接 | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | チタン | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | 歯科用貴金属合金 | |||||||
| 資源タイプ | ||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||
| 資源タイプ | journal article | |||||||
| その他（別言語等）のタイトル | ||||||||
| その他のタイトル | Study on laser welding of titanium coupled with dental precious alloys | |||||||
| 著者 |
吉田, 貴光
× 吉田, 貴光
|
|||||||
| 抄録 | ||||||||
| 内容記述タイプ | Abstract | |||||||
| 内容記述 | Laser welding has been reported as a promising welding technique for joining titanium materials. However, since it is anticipated that titanium prostheses will become more popular in the near future, dissimilar-material laser welding of titanium materials should be evaluated and investigated. When titanium materials are fusion-welded to dissimilar materials, several problems mayoccur, including corrosion of the weldment and elemental-dissolution from the weldment, possibly causing deterioration of the original excellent properties of titanium materials. Furthermore, since laser welding for dissimilar joining with titanium materials has not been well established, poor penetration might take place. In the present study, the feasibility of laser welding of titanium materials to dental precious alloys was investigated. The study included bending strength, strain, hardness and elemental-dissolution of the dissimilar joints. The following results were obtained. 1. Bend strengths of similar weldments were lower than those obtained with base materials, except TI. 2. Distortion of similar weldments showed lower values than base materials. 3. Similar weldments of TI-TI exhibited a higher value of hardness, while other similar weldments showed lower hardness values than those obtained for base materials. 4. Dissimilar weldments of titanium showed lower bending strength and strain than did base materials. 5. Dissimilar Titanium weldments showed greater hardness than those obtained from the base materials. 6. SEM fractography of dissimilar joints revealed many porosities which appeared to be created during the welding procedure. Moreover, fractured surfaces indicated the presence of brittle materials at the dissimilar titanium joints. 7. The dissolution amount of Ti from dissimilar titanium joints in 1% lactic acid aqueous solution exhibited a higher value than that detected from base materials. 8. There were no statistically significant differences in bending strength before and after immersion in 1% lactic acid aqueous solution in both similar and dissimilar titanium joints. 9. Only TI-PT joints exhibited a lower value of strain after immersion in 1% lactic acid aqueous solution than the strain before the immersion. | |||||||
| 書誌情報 |
松本歯学 巻 29, 号 2, p. 170-188, 発行日 2003-08-31 |
|||||||
| 出版者 | ||||||||
| 出版者 | 松本歯科大学学会 | |||||||
| ISSN | ||||||||
| 収録物識別子タイプ | ISSN | |||||||
| 収録物識別子 | 0385-1613 | |||||||
| 書誌レコードID | ||||||||
| 収録物識別子タイプ | NCID | |||||||
| 収録物識別子 | AN00232590 | |||||||
| フォーマット | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | application/pdf | |||||||
| 著者版フラグ | ||||||||
| 出版タイプ | VoR | |||||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||
