WEKO3
アイテム
Studies on the Castability of Pure Titanium (Part 4) Castability in case of casting molds with low gas permeability
https://mdu.repo.nii.ac.jp/records/746
https://mdu.repo.nii.ac.jp/records/746c6cb28ca-081b-4d29-994d-7c44df99090e
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
matsumoto_shigaku_24-01-10.pdf (619.6 kB)
|
|
| Item type | Journal Article(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2012-05-24 | |||||||
| タイトル | ||||||||
| タイトル | Studies on the Castability of Pure Titanium (Part 4) Castability in case of casting molds with low gas permeability | |||||||
| 言語 | en | |||||||
| 言語 | ||||||||
| 言語 | eng | |||||||
| キーワード | ||||||||
| 言語 | en | |||||||
| 主題Scheme | Other | |||||||
| 主題 | Pure titanium | |||||||
| キーワード | ||||||||
| 言語 | en | |||||||
| 主題Scheme | Other | |||||||
| 主題 | Castability | |||||||
| キーワード | ||||||||
| 言語 | en | |||||||
| 主題Scheme | Other | |||||||
| 主題 | Permeability | |||||||
| 資源タイプ | ||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||||
| 資源タイプ | journal article | |||||||
| その他（別言語等）のタイトル | ||||||||
| その他のタイトル | 純チタンの鋳造性に関する研究(第4報)通気性の低い鋳型への鋳造 | |||||||
| 著者 |
OHNO, TAKAFUMI
× OHNO, TAKAFUMI
|
|||||||
| 抄録 | ||||||||
| 内容記述タイプ | Abstract | |||||||
| 内容記述 | The purpose of this study was to evaluate the influence of casting molds with low permeability on the castability of pure titanium with an all directional pressured type casting machine. Two types of phosphate bonded casting molds were used, T-INVEST and T-INVEST C&B. We reported high performance of castability of pure titanium with an all directional pressured type casting machine, if the permeability of the investment was lower as possible. Specially prepared metal sealed rings to decrease gas permeability of casting mold were used. Two sizes of sprue condition were prepared, 1.26 and 1.48mm, under a casting pressure of 8kgf/cm^2. Five sizes of casting molds were prepared with mold diameters of 25, 35,45,55 and 65mm. The following results were obtained: A high percentage of castability was gained in T-INVEST using a high gas permeability casting mold with the sealed ring. A low percentage of castability was gained in T-INVEST C&B using a low gas permeability casting mold with the sealed ring. Back pressure action in the casting mold of T-INVEST C&B seemed to produce negative effects regarding the castability. These results indicated that the sealed ring was effective to promote pure titanium castability with a mold of high permeability. | |||||||
| 書誌情報 |
松本歯学 巻 24, 号 1, p. 101-108, 発行日 1998-04-30 |
|||||||
| 出版者 | ||||||||
| 出版者 | 松本歯科大学学会 | |||||||
| ISSN | ||||||||
| 収録物識別子タイプ | ISSN | |||||||
| 収録物識別子 | 0385-1613 | |||||||
| 書誌レコードID | ||||||||
| 収録物識別子タイプ | NCID | |||||||
| 収録物識別子 | AN00232590 | |||||||
| フォーマット | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | application/pdf | |||||||
| 著者版フラグ | ||||||||
| 出版タイプ | VoR | |||||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||
